RFID Equipment

Reader Kit : ALR-F800 4-port X2 Emissary reader (supports up to 8 additional Alien readers), (2) 6 foot LAN cable, (1) US Power Cord, (1) PoE Power Supply, (1) USB Type B to A cable. For use in US, Canada, Mexico and some Latin American countries.

Reader Only : ALR-F800 4-port X2 Emissary reader (supports up to 8 additional Alien readers), No PoE/DC Power Supply or GPIO connector included. For use in US, Canada, Mexico and some Latin American countries.

Reader Kit : ALR-9680 4-port EMA reader, (1) 6 foot LAN cable, (1) Europe Power Cord, (1) PoE Power Supply. For use in Europe, Middle East and Africa.

ALR-F800-X w/Emissary, two Hydra reader/ antenna combo?s (ALR-F3720-USA-S+ALRF3733di-USA-S), ALR-A1001-F-S antenna, ALX- 431-6 antenna cable, Ethernet cables (4), 4-port PoE switch, serial cable, micro-SD card and black carry case. Mount Type: Standard flush mount / through hole mount

RFID Reader - Impinj Speedway Revolution - 4-Port - GX3 - Fixed Reader. Does Not Include Power Supply or Power Cord. For Use in Australia

The FEIG ID ANT100/100 HF Antenna for proximity reader modules is the perfect addition to all of your eTicketing, eMobility, and Closed Loop Payment solutions. The ID ANT100/100 support systems according to ISO 14443-A/-B and ISO 15693. The ID ANT100/100 external antenna offers multiple supported HF reader modules.

The FEIG HF Antenna ID ANT310 / 310-A is distributed, already adjusted for most applications ex works. By means of jumpers the ID ANT310 / 310-A can be adjusted to changing surrounding conditions, optimally. The ID ANT310 / 310-A can be employed in indoor and outdoor use (IP65) and with a maximum transmitting power of up to 8 W, the antenna can be operated with several FEIG HF readers. Typical applications for the ID ANT310 / 310-A are libraries, document tracking, logistics at conveyor belts or sorting systems, access control and industrial data acquisition.

The FEIG ID ANT340 / 240 is designed as a particularly flat external antenna for contactless data exchange with HF transponders and impresses with its excellent performance and elegant design. These characteristics make the ID ANT340 / 240 perfectly suited for desktop applications in offices or libraries. Beside the variant with plastic housing, the ID ANT340 / 240 is also available as an antenna module without housing. The ID ANT340 / 240 has a read range of up to 30 cm. ID ANT340/240 has a coaxial cable and can be operated with a reader, immediately.

The FEIG ID ANT40/30 HF Antenna for proximity reader modules is the perfect addition to all of your eTicketing, eMobility, and Closed Loop Payment solutions. The ID ANT40/30 support systems according to ISO 14443-A/-B and ISO 15693. The ID ANT40/30 external antenna offers multiple supported HF reader modules.

The FEIG HF Long Range Antenna ID ANT800 / 600-DA can be used in combination with the reader ID LR(M)1002 and ID LR(M)2500. The ID ANT800 / 600-DA is a single loop antenna with tuning circuitry and facilitates read ranges of up to 100 cm with a transmitting power of 4 W. After installing in changed ambient conditions, the ID ANT800 / 600-DA can be tuned using the corresponding commands. The ID ANT800 / 600-DA consists of the electrical antenna conductor, housing and the tuning circuitry ID DAT (Tuner) and is factory tuned on a wood base to an impedance of 50 ohm.